Monthly Archives: April 2019

//April

How to Repair the Casting Defection

The most fundamental focus of the solution to repair the casting defection in castings is "heat balance." The method is: (1) In the thick and hot joints formed by the machine tool casting structure, rapid solidification is carried out, artificially causing the basic balance of the temperature field throughout the casting of the machine tool. [...]

By |April 29th, 2019|Casting and Accessories|Comments Off on How to Repair the Casting Defection

Inspection of Internal Defects in Castings

For internal defects, commonly used non-destructive testing methods are radiation detection and ultrasonic testing. Among them, the radiation detection effect is the best, it can obtain an intuitive image reflecting the type, shape, size and distribution of internal defects, but for large castings with large thickness, ultrasonic testing is very effective, and the position of [...]

By |April 26th, 2019|Casting and Accessories|Comments Off on Inspection of Internal Defects in Castings

Defects of Sand Casting

Defects of Sand casting include: cold isolation,insufficient pouring, blowhole, sand bonding, sand inclusion, sand hole, sand swelling, etc. 1) Cold insulation and insufficient pouring The liquid metal filling capacity is insufficient, and the molten metal stops flowing before the cavity is filled, which will cause the casting to have insufficient or cold insulation defects. When [...]

By |April 24th, 2019|Casting and Accessories|Comments Off on Defects of Sand Casting

Casting Application

The casting is a metal molded object obtained by various casting methods, that is, the smelted liquid metal is poured into a pre-prepared mold by pouring, injecting, inhaling or other casting method, and after cooling, after falling sand, cleaning and then Processing, etc., the resulting object with a certain shape, size and performance. Castings are [...]

By |April 22nd, 2019|Casting and Accessories|Comments Off on Casting Application

History of Casting

The casting is a metal molded object obtained by various casting methods, that is, the smelted liquid metal is poured into a pre-prepared mold by pouring, injecting, inhaling or other casting method, and after cooling, after grinding and other subsequent processing means. The resulting object with a certain shape, size and performance. Casting applications have [...]

By |April 18th, 2019|Casting and Accessories|Comments Off on History of Casting

Detection of Hydraulic Valve Block Burrs

Detection of Hydraulic Valve Block Burrs In order to ensure the cleanliness of the hydraulic system, the hydraulic valve block must be deburred.In order to ensure the cleanliness of the hydraulic system, the hydraulic valve block must be deburred. At present, many manufacturers still use manual brushing for deburring, but also use methane blasting to [...]

By |April 15th, 2019|Hydraulic Valve Block, Valve Block|Comments Off on Detection of Hydraulic Valve Block Burrs

Hydraulic Valve Block Processing Technology

The hydraulic valve block (referred to as hydraulic valve) is a control component in the hydraulic system. It is used to control the pressure, flow and flow direction of the fluid in the hydraulic system, so that it can meet the requirements of different actuators. Because of its compact structure, good sealing performance, convenient maintenance, [...]

By |April 13th, 2019|Hydraulic Valve Block, Valve Block|Comments Off on Hydraulic Valve Block Processing Technology
  • Application of Gearbox

Application of Gearbox

The gearbox acts as a matching precision and transmission torque between the prime mover and the working machine or the actuator. The gearbox is a relatively precise machine that is used to reduce the speed. According to the different drive stages, it can be divided into single or multi-stage reducers. According to the shape, it [...]

By |April 12th, 2019|Gearbox|Comments Off on Application of Gearbox
  • Transmission Shaft

Introduction of Transmission Shaft

The transmission shaft is a rotating body with high speed and few supports, so its dynamic balance is very important. Generally, the dynamic balance test of the transmission shaft should be carried out before leaving the factory, and the adjustment is made on the balancing machine. For a front-engine rear-wheel drive vehicle, the rotation of [...]

By |April 11th, 2019|Drive Shaft, Transmission Shaft|Comments Off on Introduction of Transmission Shaft
  • hydraulic valve block

How to Cast Hydraulic Valve Block

Hydraulic valve Block is one of the most important components in hydraulic transmission system. For a long time, oil passages with small cross-section in hydraulic valve body of coal mining machinery have been obtained by mechanical processing, which increases the workload of mechanical processing and prolongs the production cycle of spoon. At the same time, [...]

By |April 10th, 2019|Hydraulic Valve Block|Comments Off on How to Cast Hydraulic Valve Block