/Saivs Machinery

About Saivs Machinery

This author has not yet filled in any details.
So far Saivs Machinery has created 33 blog entries.

Detection of Hydraulic Valve Block Burrs

Detection of Hydraulic Valve Block Burrs In order to ensure the cleanliness of the hydraulic system, the hydraulic valve block must be deburred.In order to ensure the cleanliness of the hydraulic system, the hydraulic valve block must be deburred. At present, many manufacturers still use manual brushing for deburring, but also use methane blasting to [...]

By |April 15th, 2019|Hydraulic Valve Block, Valve Block|0 Comments

Hydraulic Valve Block Processing Technology

The hydraulic valve block (referred to as hydraulic valve) is a control component in the hydraulic system. It is used to control the pressure, flow and flow direction of the fluid in the hydraulic system, so that it can meet the requirements of different actuators. Because of its compact structure, good sealing performance, convenient maintenance, [...]

By |April 13th, 2019|Hydraulic Valve Block, Valve Block|0 Comments
  • Application of Gearbox

Application of Gearbox

The gearbox acts as a matching precision and transmission torque between the prime mover and the working machine or the actuator. The gearbox is a relatively precise machine that is used to reduce the speed. According to the different drive stages, it can be divided into single or multi-stage reducers. According to the shape, it [...]

By |April 12th, 2019|Gearbox|0 Comments
  • Transmission Shaft

Introduction of Transmission Shaft

The transmission shaft is a rotating body with high speed and few supports, so its dynamic balance is very important. Generally, the dynamic balance test of the transmission shaft should be carried out before leaving the factory, and the adjustment is made on the balancing machine. For a front-engine rear-wheel drive vehicle, the rotation of [...]

By |April 11th, 2019|Drive Shaft, Transmission Shaft|0 Comments
  • hydraulic valve block

How to Cast Hydraulic Valve Block

Hydraulic valve Block is one of the most important components in hydraulic transmission system. For a long time, oil passages with small cross-section in hydraulic valve body of coal mining machinery have been obtained by mechanical processing, which increases the workload of mechanical processing and prolongs the production cycle of spoon. At the same time, [...]

By |April 10th, 2019|Hydraulic Valve Block|0 Comments
  • Bearing Block

Bearing Block

Bearing pedestal guide is a kind of large and super-large bearing pedestal which can accept comprehensive load and has special structure. It has the characteristics of compact structure, sensitive rotation and convenient maintenance of the device. Where there is a bearing, there must be a support point. The internal support point of the bearing is [...]

  • Blade Bolts Used in Wind Turbine

Blade Bolts Used in Wind Turbine

A disassembly method for main blade bolts of wind turbine with shaft sleeve is used to disassemble the bearing from the main shaft. Its characteristics include: cooling the main shaft, taking the material and mechanical properties of the main shaft as the cooling limit; heating the bearing inner ring of the main bearing; cooperating with [...]

  • Turbine Blade Bushing

Main Applications of Turbine Blade Bushing

What are the main applications of Turbine Blade Bushing? The copper sleeve on the shaft acts as a bearing. It belongs to the large class of sliding bearings. It works under sliding friction. The relative shaft rotates, and generally needs to be assisted by a lubrication system. The sliding bearing works smoothly, reliably and without [...]

General Steps to Make Sand Casting

How to Make Sand Casting? Sand casting includes four basic steps:  sand mold, pour liquid metal into the mold,cooling, break away the sand and remove the casting. Of course, the process is more complex than it sounds. The first step of mold assembly is to partially fill the drag with sand. The pattern, core print, [...]

By |April 2nd, 2019|Casting and Accessories|0 Comments

Applications and Pressures of Hydraulic Cylinder

Saivs is a factory which supply kinds of hydraulic cylinder, such as piston hydraulic cylinder, telescopic hydraulic cylinder and swing hydraulic cylinder and so on. The telescopic hydraulic cylinder can be used in many applications requiring linear force to be applied over a long distance. Although rod cylinders may perform this task, they may be [...]