Bearing Seat

/Bearing Seat

High Temperature Bearing Seat

Because the high temperature bearing seat should not only meet the requirements of high precision stamping bearing seat, but also meet the requirements of high temperature stamping bearing pedestal, the following two points should be taken into account when considering the fit and clearance of high temperature bearing seats: 1. Size change and hardness change [...]

By |August 8th, 2019|Bearing Pedestal, Bearing Seat|Comments Off on High Temperature Bearing Seat

Cleaning of Bearing Seats

Before the bearing seats are installed and guided, it should also be thoroughly cleaned and inspected. Scrape the dirt away with a scraper inside the bearing seat, wipe the dirt away with a cloth dipped in gasoline or solvent, and watch for cracks and sand holes to prevent oil seepage during operation. The joint surface [...]

By |August 6th, 2019|Bearing Block, Bearing Seat|Comments Off on Cleaning of Bearing Seats

Maintenance of Bearing Base

Special attention should be paid to the following points in the use of bearing base: 1. Use of cooling system of bearing base. When the cooling water of bearing seat is used correctly, not only the service life of bearing seat is prolonged, but also the production efficiency is improved. The material of bearing seat [...]

By |August 3rd, 2019|Bearing Chock, Bearing Seat|Comments Off on Maintenance of Bearing Base

Bearing Seat Wear

Bearing seat wear often occurs. Traditional repairing methods usually use machine-processing after surfacing to repair, and surfacing can make the surface of parts reach a high temperature, causing parts to deform or crack, and the downtime is greatly prolonged by machine-processing to obtain dimensions. The on-site repairing with polymer composites has neither thermal effect nor [...]

By |August 2nd, 2019|Bearing Pedestal, Bearing Seat|Comments Off on Bearing Seat Wear

Role of Block Bearings

Brief Introduction for Block Bearings: Bearing with seat is composed of outer spherical ball bearing with seal on both sides and cast (or stamped) bearing seat. The inner structure of the block bearings is the same as that of the deep groove ball bearing, but the inner ring of the bearing is wider than the [...]

By |May 29th, 2019|Bearing Pedestal, Bearing Seat|Comments Off on Role of Block Bearings

About Bearing Pedestals

What are the functions of bearings and bearing pedestals? Bearing is used to make the shaft run along the circumference and support the shaft, the conventional use is two bearings or more, its role is to make the shaft run normally, and the bearing seat is used to support the bearing, fixed the outer ring [...]

By |May 28th, 2019|Bearing Block, Bearing Pedestal, Bearing Seat|Comments Off on About Bearing Pedestals
  • Bearing Block

Bearing Block

Bearing pedestal guide is a kind of large and super-large bearing pedestal which can accept comprehensive load and has special structure. It has the characteristics of compact structure, sensitive rotation and convenient maintenance of the device. Where there is a bearing, there must be a support point. The internal support point of the bearing is [...]

By |April 9th, 2019|Bearing Block, Bearing Chock, Bearing Pedestal, Bearing Seat|Comments Off on Bearing Block