Cast Steels

/Cast Steels

Requirements for Precision Steel Castings

Precision steel castings have high dimensional accuracy for casting steel, the general linear tolerance is 1%, the angle tolerance is + 1/2 degrees, and the surface finish can reach Ra 1.6 - 3.2, which saves material and machining cost. It can produce parts with complex shapes, or cast multiple parts into one, eliminating the combination [...]

By |March 17th, 2020|Cast Steels, Casting and Accessories, Castings and Forgings, Precision Casting, Pressure Die Casting|Comments Off on Requirements for Precision Steel Castings

Temperature Control for Precision Casting

The ambient temperature control for precision casting usually refers to the ambient temperature of cemented carbide steel in the static furnace, which is 60-120 ℃ higher than that of alloy liquidus. For the alloy with excessive primary crystal tendency of oxide between cemented carbides, the ambient temperature of precision casting should be raised as much [...]

By |March 14th, 2020|Cast Steels, Casting and Accessories, Castings and Forgings, Precision Casting|Comments Off on Temperature Control for Precision Casting

Pouring Process for Stainless Steel Castings

Pouring process for stainless steel castings is a key point in the production and manufacturing. If the key point is not handled properly, it is difficult to cast stainless steel castings up to the standard. Therefore, in the processing of stainless steel castings, it is necessary to strictly implement the standards to carry out all [...]

By |March 10th, 2020|Cast Steels, Casting and Accessories, Castings and Forgings, Stainless Steel Castings|Comments Off on Pouring Process for Stainless Steel Castings

What is the Slag Inclusion in Stainless Steel Casting

Slag inclusions are produced in the process of stainless steel casting, which are divided into primary slag and secondary slag. Primary slag: the slag produced in the process of molten steel smelting and treatment flows into the furnace cavity with water flow. Most of them are caused by the artificial or unsatisfactory slag retaining effect [...]

By |February 27th, 2020|Cast Steels, Casting and Accessories, Castings and Forgings|Comments Off on What is the Slag Inclusion in Stainless Steel Casting

Characteristics of Different Cast Steels

Cast steels are kinds of steel used for casting, is a kind of casting alloy. Cast steel is a way of industrial production of parts, and is also widely used. Cast steel can be divided into different types according to different carbon content. Carbon cast steel can be divided into: low carbon cast steel with [...]

By |February 24th, 2020|Cast Steels, Casting and Accessories, Castings and Forgings|Comments Off on Characteristics of Different Cast Steels