Casting and Accessories

/Casting and Accessories

Casting and Accessories

Investment Casting Development Prospect

Investment Casting Development Prospect: Investment casting refers to making fusible model with fusible materials, coating several layers of special refractory coating on it, drying and hardening to form an integral shell, then melting the model from the shell with steam or hot water, then placing the shell in the sand box, filling the dry sand [...]

By |December 31st, 2019|Casting and Accessories, Castings and Forgings|Comments Off on Investment Casting Development Prospect

Introduction of Precision Casting

Precision casting is one of the casting methods. Precision casting is a special casting method compared with the traditional casting process. It can obtain relatively accurate shape and high casting precision. The common practice of precision casting is: first, according to the product requirements, design and manufacture the mold (with little or no allowance), cast [...]

By |December 30th, 2019|Casting and Accessories, Castings and Forgings|Comments Off on Introduction of Precision Casting

Advantages of Precision Machining

Precision machining is a rigorous and complex process, which is widely used in the processing of various parts, ranging from mobile phone parts to aerospace equipment parts. Why do these people have to deal with a part in this process? What are the advantages of precision machining? Ordinary processing can not produce high-precision products, because [...]

By |July 22nd, 2019|Casting and Accessories, Hydraulic Parts|Comments Off on Advantages of Precision Machining

Steel Casting Part

Steel Casting part is to melt cast iron or steel and pour it into the pre-prepared mold shell. After cooling, removing the shell will become the part blank. This process reduces the amount of processing, especially for parts with more curved surface, which is difficult to process. Casting solves the processing difficulties and improves the [...]

By |July 3rd, 2019|Casting and Accessories, Castings and Forgings|Comments Off on Steel Casting Part

About Mold Casting

Mold casting is a widely used form of casting. As the name suggests, sand is used to make molds. Sand casting requires placing a finished part model or a wooden model (pattern) in the sand, then filling the pattern around the sand, and unpacking the pattern to form the mold. In order to remove the [...]

By |July 1st, 2019|Casting and Accessories, Castings and Forgings|Comments Off on About Mold Casting

Difference between Castings and Forgings

1. Differences in mechanical properties After the forging is processed twice, there will be a hardening process, which will lead to fine arrangement, no directional mechanical properties, better than the casting. 2. Different moulding methods Castings are melted by melting furnace, poured into the model, cooled and formed; forgings are formed by repeated restrictions under [...]

By |May 10th, 2019|Casting and Accessories, Castings and Forgings|Comments Off on Difference between Castings and Forgings

Development Trend of Castings

China is a large casting country, and the domestic castings are seriously over-produced. However, China’s severe overcapacity of castings refers to the overcapacity of low-end castings in China. It is difficult for China’s high-end castings to meet the needs of the market. Therefore, China’s The demand for castings transforms the production capacity of low-end castings [...]

By |May 6th, 2019|Casting and Accessories|Comments Off on Development Trend of Castings

Factors Influencing the Solidification Mode of Castings

There are many ways to solidify castings. In the process of solidification of castings, the section is generally divided into three sections: 1.solid phase zone 2.coagulation zone 3.the liquid phase zone.the greater influence on the solidification zone is the width and narrowness of the solidification zone, and the solidification mode is divided accordingly. First, intermediate [...]

By |May 2nd, 2019|Casting and Accessories|Comments Off on Factors Influencing the Solidification Mode of Castings

How to Repair the Casting Defection

The most fundamental focus of the solution to repair the casting defection in castings is "heat balance." The method is: (1) In the thick and hot joints formed by the machine tool casting structure, rapid solidification is carried out, artificially causing the basic balance of the temperature field throughout the casting of the machine tool. [...]

By |April 29th, 2019|Casting and Accessories|Comments Off on How to Repair the Casting Defection

Inspection of Internal Defects in Castings

For internal defects, commonly used non-destructive testing methods are radiation detection and ultrasonic testing. Among them, the radiation detection effect is the best, it can obtain an intuitive image reflecting the type, shape, size and distribution of internal defects, but for large castings with large thickness, ultrasonic testing is very effective, and the position of [...]

By |April 26th, 2019|Casting and Accessories|Comments Off on Inspection of Internal Defects in Castings