Gearbox Housing

/Gearbox Housing

Material for Transmission Gearbox Case

The transmission gearbox case is a load-bearing part, which is usually made of die-casting aluminum alloy by special die-casting, with irregular and complex shape. In the early stage, the gearbox shell was mainly made of gray cast iron, which was easy to form, good in shock absorption and low in cost. With the improvement of [...]

By |May 8th, 2020|Gearbox Housing, Hydraulic Transmission Parts, Transmission Gearbox Housing|Comments Off on Material for Transmission Gearbox Case

Transmission Housing

The transmission housing is a housing structure for installing transmission transmission mechanism and its accessories. Basic structure of transmission housing: In order to reduce the wear and power loss of parts caused by internal friction, it is necessary to inject lubricating oil into the shell and use splash lubrication to lubricate the working surfaces of [...]

By |May 7th, 2020|Gearbox Housing, Hydraulic Transmission Parts, Transmission Gearbox Housing|Comments Off on Transmission Housing

About Gearbox Case

What is the function of the gearbox case? Avoid the corrosion of parts and components in the peripheral environment. Lubricate parts as containers of lubricating oil. Material of gear box body: Cast iron, cast steel. The gearbox housing is composed of bottom shell, top cover, sealing, fastening screw, etc. Why does the box body on [...]

By |May 15th, 2019|Gearbox, Gearbox Housing|Comments Off on About Gearbox Case

The Materials for Gearbox Housing

What materials are used for gearbox housing? The material of gearbox housing should have enough strength and good casting performance, and low cost. The common material of medium and small transmission case is pressure casting aluminium alloy with properties not less than tensile strength_b of 200 MPa. The chemical composition of the British standard BS [...]

By |May 13th, 2019|Gearbox Housing|Comments Off on The Materials for Gearbox Housing