In mechanical work, noise treatment of gearbox is very necessary. Gearbox is an important component widely used in mechanical transmission. When a pair of gears engage, because of unavoidable errors such as pitch and tooth shape, there will be meshing impact during operation and noise corresponding to gear meshing frequency. Friction noise also occurs between tooth surfaces due to relative sliding. As gears are the basic parts of gearbox transmission, it is necessary to noise treatment of gearbox to control gearbox noise. Generally speaking, the main causes of gear system noise are as follows:
1. Gear design. Improper parameter selection, too small coincidence, improper profile modification or no modification, unreasonable gear box structure and so on. In gear processing, pitch error and tooth profile error are too large, side clearance is too large, surface roughness is too large, etc.
2. Gear system and gearbox. Eccentricity of assembly, low contact accuracy, poor parallelism of shaft, insufficient stiffness of shaft, bearing and support, low rotation accuracy and inappropriate clearance of bearing, etc.
3. Input torque in other aspects. The fluctuation of load torque, torsional vibration of shafting, balance of motor and other transmission pairs, etc.

Garden Tools Gearbox

Spiral Bevel Gearbox,Lawn Mower Gearbox,Grass Cutter Gearbox,Rotary Mower Gearbox,Right Angle Gearbox,Transmission Gearbox for Lawn Mower Details of Garden Tools Gearbox: Gearing Arrangement: Spur Output Torque: 29.5 da Nm Rated Power: 65 HP Input Speed: 540 r.p.m Output Speed: ratio(i)3:1 Garden Tools Gearbox Used in: Mower/grass cutter Various of gearboxes used in agricultural machines and industrial […]