Push Pull Hydraulic Cylinders,Hydraulic Plunger Cylinder,Double Acting Hydraulic Cylinder,Hydraulic Welded Cylinder Our advantage of Hydraulic Piston Cylinder: 1.Complete after sale service. 2.Both metric and imperial size cylinder can be provided. 3.Design and manufacture hydraulic cylinder as requirements from customers even without drawings. 4.All kinds of mounting type. 5.100% raw material test and 100% test before […]
Dump Truck Hydraulic Cylinder,Hydraulic Swing Cylinder,Hydraulic Piston Cylinder,Push Pull Hydraulic Cylinders,Hydraulic Plunger Cylinder
Feature of Dump Truck Hydraulic Cylinder：
1.An integration of mechanical,electrical,hydraulic and instrumental functions,realizing on-site and remote control.
2.Large output force, stepless speed and force adjustment, stable operation,quick movement,low impact.
3.Powerful overload protection,equipped with automatic unloading function,continuous running, no overheat issue.
4.High transmission efficiency above 80%,the motor power is half of other hoists for the same output
5.Compact structure,small size,two-way force feature.
A Dump Truck Hydraulic Cylinder is a mechanical actuator used to provide unidirectional force through a unidirectional stroke. Hydraulic cylinders are used in almost every industry and are available in a variety of onfigurations.
The reason for the different cylinder use per application is due to the ability or restriction on being able to retract the extended cylinder. In a typical dump application, the truck/trailer body will be lifted into the air by the cylinder and the weight of the body will cause the cylinder to retract. In some cases the body of the truck/trailer may go “over center,” meaning that the body of the vehicle is now pulling on the cylinder once fully extended. In this type of scenario a single stage double acting or a fully double acting cylinder is required to, at minimum, pull the body back far enough to allow gravity to take over. Horizontal, or near horizontal applications, do not have gravity available to assist in the retracting of the cylinder. As a result, an internal hydraulically created force is required. Overhung loads, such as a heavy tailgate or several feet of the body extending past the body hinge, can also create scenarios that require a double acting cylinder.